menu
Home > Products > HB Series
 

Variable displacement pumps to control the multi-cylinder movements to save energy, long life, low maintenance purposes.

 

35t ~ 270t
320t ~ 850t
1200t ~ 4000t

Energy efficiency hybrid system
70% POWER SOURCE SAVING MAXIMUM
Microminiaturize . Low Noise . Easy Operation . High Efficiency . Energy Saving

New hydraulic circuit design, integration of electrical control technology, not only achieve a high response, Low noise, the precision of speed and pressure control, and not compromise the ability of holding injection. More can be avoided by a large amount of waste lubricants and Ball screw contour supplies shortcomings that existing from Electric injection machine.
Low depletion of energy control technology import, increased significantly inhibit oil temperature(5 to 10C), and stability the actuator oil quality, not only improve the efficiency of the machinery and molded product yields, will also be eligible for dynamic Oil life enhancement, and administrative expenses of the cooling system of multiple economic benefits.
Mining closed loop with a single pump to control the multicylinder actuator, aims to save energy. The system for the minimum amount of investment.
Lower supplies and maintenance needs, and improve energy use efficiency, environmental protection, etc. All lower operating costs, making the initial investment difference in the short term can be very rapid recovery.
Type Unit LF 187HB LF 270HB LF 320HB
Injection unit
Screw diameter mm 45 50 55 50 55 60 55 60 65
Shot weight gr 315 388 470 441 534 635 630 750 880
Injection pressure kg/cm2 2500 2025 1675 2530 2090 1775 2170 1822 1555
Theoretical shot gr 350 432 522 490 593 706 700 834 978
injection rate cm3/sec 175 238 215 294 260 356 215 304 261 368 310 438 296 380 353 452 414 530
Injection speed mm/sec 110 150 110 155 125 160
Plasticizing rate kg/hr 165 189 250
Mold lock unit
Number of cylinder pcs. 4 4 4
Clamping force ton 200 300 320
Opening stroke mm 650 800 900
Minimum mold mm 200 300 300
Tie bar clearance mm 505x505 552x552 610x610
Ejector stroke mm 95 150 150
Other
Servo motor hp/kw 30 22.5 40 30 50 37.5
Heater capacity kw 11.5 15 15
Oil tank capacity ltr 600 800 1000
Machine weight ton 8 12 15
Machine size (LxWxH) mm 5530x1425x2210 6625x1740x2350 6700x2100x2450
Type Unit LF 370HB LF 507HB LF 607HB LF 707HB
Injection unit
Screw diameter mm 60 65 70 65 70 75 70 75 80 75 80 85
Shot weight gr 890 1045 1211 1045 1212 1390 1471 1689 1922 1689 1921 2169
Injection pressure kg/cm2 2060 1755 1515 2145 1850 1610 2357 2055 1805 2550 2240 1985
Theoretical shot gr 989 1160 1346 1160 1346 1545 1634 1877 2135 2550 2240 1985
injection rate cm3/sec 310 424 365 497 423 576 365 464 423 539 485 618 423 558 485 640 552 728 441 662 502 753 567 850
Injection speed mm/sec 110 150 110 140 110 145 100 150
Plasticizing rate kg/hr 291 320 350 400
Mold lock unit
Number of cylinder pcs. 4 4 4 4
Clamping force ton 400 500 600 700
Opening stroke mm 950 1100 1150 1150
Minimum mold mm 400 400 400 450
Tie bar clearance mm 665x665 710x710 805x765 860x810
Ejector stroke mm 200 200 200 250
Other
Servo motor hp/kw 50 37.5 50 .37.5 40+40 60 40+40 60
Heater capacity kw 16 21 25 28
Oil tank capacity ltr 1200 1400 1600 1800
Machine weight ton 18 22 26 30
Machine size (LxWxH) mm 6390x2140x2450 7500x1700x2500 8120x1850x2600 8120x1900x2680
Type Unit LF 537HB LF 637HB LF 737HB LF 837HB
Injection unit
Screw diameter mm 60 70 75 70 75 80 75 80 85 90 100
Shot weight gr 895 1038 1193 1471 1689 1922 1689 1921 2169 2860 3535
Injection pressure kg/cm2 2004 1729 1505 2057 1792 1575 1944 1710 1414 1944 1575
Theoretical shot gr 995 1154 1325 1634 1877 2135 1877 2135 2410 3179 3925
injection rate cm3/sec 389 462 530 462 530 603 530 603 680 699 864
Injection speed mm/sec 120 120 120 110
Plasticizing rate kg/hr 300 350 400 600
Mold lock unit
Number of cylinder pcs. 4 4 4 4
Clamping force ton 500 600 700 850
Opening stroke mm 700 850 900 1100
Minimum mold mm 400 400 450 450-1100
Tie bar clearance mm 705x705 805x805 905x905 1005x1005
Ejector stroke mm 180 200 250 250
Other
Servo motor hp/kw 50 37.5 40+40 60 40+40 60 50+50 75
Heater capacity kw 21 25 28 30
Oil tank capacity ltr 750 870 880 2000
Machine weight ton 19 22 26 30
Machine size (LxWxH) mm 6820x1720x2060 7110x1940x2075 7870x2140x2080 9830x2800x2500
Type Unit
Injection unit
Screw Diameter mm
Shot Weight (PS) gr
Injection Pressure kg/cm2
Theory Shot Volume cm3
Injection Rate cm3/sec.
Injection Speed mm/sec.
Plasticizing rate kg/hr
Mold lock unit
Number of Cylinder Drive  pcs.
Clamping Force ton
Opening Stroke mm
Minimum Mold Thickness mm
Maximum Daylight mm
Space Between Tie Bar (HxV) mm
Ejector Stroke mm
Other
Pump Motor (Servo Motor & Piston Pump) hp/kw
Heater Capacity kw
Oil Tank Capacity ltr
Machine Weight ton
Machine Size (L×W×H) mm
LF 37 LF 57 LF 77 LF 107 LF 137 LF 187 LF270
18 20 18 20 22 25 22 25 28 30 28 30 35 30 35 40 45 50 55 50 55 60
18 23 25 31 38 48 44 57 72 82 99 114 155 114 155 203 315 388 470 441 534 635
3456 2800 3462 3160 2612 2023 3616 2800 2232 1945 2695 2348 1726 3208 2357 1805 2600 2106 1741 2625 2170 1822
20 25 28 35 42 54 49 63 80 92 110 127 173 127 173 226 350 432 622 490 593 706
56 69 50 61 74 96 65 83 105 120 86 99 135 99 135 175 175 215 261 215 261 310
220 195 170 140 140 110 110
14 17 14 17 21 27 21 26 33 38 33 38 52 38 52 68 86 106 128 106 128 153
1 1 1 1 1 1 1
35 55 80 120 150 180 270
280 350 400 450 450 650 800
150 150 150 180 180 200 300
430 500 550 630 630 850 1100
255x255 302x302 352x352 402X402 402X402 505x505 552x552
70 70 70 95 95 95 150
7.5 10 15 20 25 30 40
2 3.5 5 5.9 8 11.5 15
100 200 200 400 500 600 800
1.4 2 3 6 7 8.3 12.5
3050x750x1500 3600x900x1800 3750x1150x1950 4150x1250x2050 4650x1350x2150 5050*1450*2250 6050*1550*2450
LF320 LF370 LF537 LF637 LF737 LF837
55 60 65 60 65 70 65 70 75 70 75 80 75 80 85 90 100
630 750 880 890 1045 1211 895 1038 1193 1471 1689 1922 1689 1921 2169 2860 3535
2170 1822 1555 2060 1755 1515 2004 1729 1505 2057 1792 1575 1944 1710 1414 1944 1575
700 834 978 989 1160 1346 995 1154 1325 1634 1877 2135 1877 2135 2410 3179 3925
296 353 414 310 365 423 398 462 530 462 530 603 530 603 681 699 864
125 110 120 120 120 110
128 153 179 153 179 208 179 208 238 208 238 271 238 271 306 343 424
4 4 4 4 4 4
320 500 600 600 700 850
900 700 850 1150 900 1100
300 400-700 400-800 400 450-900 450-1100
1200 1400 1650 1550 1800 2200
610x610 705X705 805X805 805x765 905X905 1005x1005
150 200 200 200 250 250
50 50 60 75 100 100
15 16 21 25 28 30
1000 1200 750 870 880 2000
15.5 18.5 19 22 26 30
6250x1650x2650 7300x1700x2700 6200x1400x2080 7500x1950x2200 7800x2150x2400 10600x2800x2400
LF837 LF1270 LF1670 LF2070 LF2570 LF3070 LF3570 LF4070
90 100 100 110 120 130 130 140 150 160 170 160 170 180 170 180 190 190 200 210
2860 3535 3535 4274 6100 7164 7760 9000 10332 11755 13270 12260 14292 16025 14292 16023 17855 17855 19782 20250
1944 1575 1905 1575 1945 1657 1914 1650 1945 1709 1514 1850 1637 1463 2200 2020 1810 1810 1650 1500
3179 3925 3925 4749 6782 7960 8623 10001 11480 13062 14746 14067 15880 17805 15880 17805 19835 19835 21980 24230
699 864 864 1045 1243 1459 1459 1692 1942 2210 2495 2210 2495 2798 2042 2290 2550 2550 2826 3115
110 110 110 110 110 110 90 90
343 424 424 513 610 716 716 831 954 1085 1225 1085 1225 1373 1225 1373 1530 1530 1696 1869
4 4 4 4 4 4 4 4
850 1200 1600 2000 2500 3000 3500 4000
1100 1400 1600 1700 1900 2300 2250 2500
450-1100 500-1350 600-1500 650-1500 650-1700 980-2000 980-2000 980-2000
2200 2750 3100 3200 3600 4300 4250 4500
1005x1005 1210x1210 1520x1420 1805X1505 1905X1605 2005X1805 2100X1900 2300X1900
250 320 380 380 380 380 380 450
100 120 180 240 300 360 420 420
30 33 43 48 59 65 65 78
2000 2400 2800 3000 3000 4000 4000 4000
30 55 70 110 145 180 200 200
10600x2800x2400 11900x3320x2600 13480x3850x3000 13880x4360x3140 15300x4650x3600 15770x4850x4200 17150x4940x4200 17700x5200x4400

Specifications subject to change without prior notice.
Special specification ordering is acceptable.






No.165, Alley 418, Lane 506, Sec.1,Xinan Rd., Wuri Dist., Taichung City 414, Taiwan.
map

Copyright © LIEN FA INJECTION MACHINERY CO., LTD. Hosted by Machinetools Directory (S & J Corp.), Plastic and Rubber Machine Directory.
Home Company Products Finished Products News E-Catalog Contact US Sitemap Home 切換語系