.::: LIEN FA INJECTION MACHINERY CO., LTD. :::. -Twin lock platen type, Multiple clamping cylinder type, High speed system, Supper high speed system, Hybrid system, labliang system, In mold labliang system, Multicolor d system, Multiple molding units system

Clamping Unit

- ST Series - 35t~270t
  
  MT Series - 320t~370t
- II Lock Platen Type :
  
  MT II Series - 500t~4000t
- VR Series - 90t~270t

Injection

- HS Series - 35t~700t
- SHS Series - 35t~370t

Energy Efficiency

- HB Series - 35t~4000t
- HBH Series- 35t~700t

Energy Efficiency


	www.lienfa.com.tw

Home > Products > MT Series

320t ~ 370t

Direct Clamping Structure

MT model with excellent structural rigidity, flexible and accurate, it reduces mechanical wear and power consumption. In response to diverse plastic molding process, the direct clamping system is widely used to meet the technical requirements for precision molding.

ST model is the advanced design from MT model. It is designed especially for the needs of low-pollution environment. It is widely prefer from the Asian electronics industry, as well as the trust from European and South American customer.

Direct output oil tank design for clamping cylinder, it increases efficiency and stability.

Automatically adjust the parallelism of the mold, mold deformation rate of the lowest.

2stages dejection device to coordinate with robot take out system, in line with demand for fully automated production line.

Clamping low pressure protection device to ensure mold safety.

Hydraulic cylinders with wear-resistant and leak-proof design, maintenance times to a minimum.

Sophisticated logic circuit design, excellent stability.

According to production needs, design multi-loop synchronous complex movements. Significantly improving productivity.

	Type	Unit


	Screw Diameter	mm
	Shot Weight (PS)	gr
	Injection Pressure	kg/cm²
	Theory Shot Volume	cm³
	Injection Rate	cm³/sec.
	Injection Speed (With Accumulator)	mm/sec.
	Plasticizing rate	kg/hr
	Drive Type


	Number of Cylinder Drive	pcs.
	Clamping Force	ton
	Opening Stroke	mm
	Minimum Mold Thickness	mm
	Maximum Daylight	mm
	Space Between Tie Bar (HxV)	mm
	Ejector Stroke	mm


	motor	hp/kw
	Heater Capacity	kw
	Oil Tank Capacity	ltr
	Machine Weight	ton
	Machine Size (L×W×H)	mm

LF 320						LF 370						LF 507


55		60		65		60		65		70		65		70		75
630		750		880		890		1045		1211		1045		1212		1390
2170		1822		1555		2060		1755		1515		2145		1850		1610
700		834		978		989		1160		1346		1160		1346		1545
296	380	353	452	414	530	310	424	365	497	423	576	365	464	423	539	485	618
125			160			110			150			110			140
128		153		179		152		179		207		179		207		238
Oil Motor


4						4						4
320						400						500
900						950						1100
300						400						400
1200						1350						1500
610x610						665x665						710x710
150						200						200


50			60			50			60			60			40+30
15						16						21
1000						1200						1400
14						18.5						20.5
6800x1500x2200						8100x1600x2300						8200x1750x2750

LF 607						LF 707						LF 807


70		75		80		75		80		85		80	85	90
1471		1689		1922		1689		1921		2169		1921	2169	2432
2357		2055		1805		2550		2240		1985		2216	1962	1750
1634		1877		2135		1877		2135		2410		2135	2410	2702
423	558	485	640	552	728	441	662	502	753	567	850	552	623	699
110			145			100			150			110
208		238		271		238		271		306		271	306	343
Oil Motor


4						4						4
600						700						800
1150						1150						1150
400						450						600
1550						1600						1750
805x765						860x810						960x960
200						250						280


40+30			40+40			40+40			50+50			40+50
26						30						36
1600						1800						2200
23.5						29.5						35.5
9200x1850x2850						9600x1900x2950						9800x2200x3050

High speed inuection molding type (option equipped )

Specifications subject to change without prior notice

Special specification ordering is acceptable

Specifications subject to change without prior notice.

Special specification ordering is acceptable.

No.165, Alley 418, Lane 506, Sec.1,Xinan Rd., Wuri Dist., Taichung City 414, Taiwan.